Dyness BF100 Outdoor Air-Cooled Battery Cabinet (100–140 kWh)
- Capacity
- 100 / 140 kWh
- Voltage
- HV
- Cycles
- —
- Warranty
- Confirm with Battery World
Engineered per project
DH200F-C260 · Commercial storage
Industrial PV + storage in one cabinet: 125 kW three-phase PCS, 261 kWh LFP, optional 4 × 63 kW MPPT and off-grid operation. Up to 10 in parallel.
DH200F integrates battery, PCS, optional MPPT solar charging, fire protection and climate control in one IP55 outdoor cabinet. It suits factories, hotels, hospitals and farms that need hours of three-phase backup and demand-charge reduction.
Battery World Uganda is the authorised Dyness distributor in Uganda. We supply the Dyness DH200F 125 kW / 261 kWh All-in-One Cabinet from our showroom at Plot 7/9, 2nd Street, Industrial Area, Kampala, and deliver across Uganda, including Wakiso, Entebbe, Mukono, Jinja, Mbarara, Gulu, Mbale. Prices depend on model, quantity and installation. Use Order on WhatsApp for a written quotation in UGX, and we can arrange professional installation and handle Dyness warranty claims locally.
See the full Dyness range in Uganda, compare it with other commercial storages, or size a complete system with Find My System.
| Battery type | LFP (LiFePO₄) |
|---|---|
| Cell capacity | 314 Ah |
| Pack configuration | 1P20S × 13 |
| Rated / max. current | 157 A / 180 A |
| Voltage range | 754 – 936 Vdc |
| Nominal capacity | 261 kWh |
| Rated power | 124.9 kW / 125 kW |
|---|---|
| AC max. input / output current | 361 A / 200 A |
| AC rated voltage | 400 Vac, 3P4L+PE |
| Frequency | 50 / 60 Hz |
| Power factor | ≥ 0.99 |
| Max. parallel | 10 |
| Rated power | 124.9 kW / 125 kW |
|---|---|
| Max. current | 200 A |
| Unbalanced load | 100 % |
| Max. parallel | 4 (requires SCC-AC) |
| Max. input power | 63 kW × 4 |
|---|---|
| Max. voltage | 720 Vdc |
| Input voltage range | 200 – 720 Vdc |
| MPPT | 4 |
| Weight | 2,900 ± 100 kg |
|---|---|
| Dimensions (W×D×H) | 2,000 × 1,345 × 2,200 mm |
| Max. efficiency | 88 % |
| Air-conditioner | 5 kW cooling, 3 kW heating |
| Operating temperature | -20 – 50 °C (derating > 45 °C) |
| Ingress protection | IP55 |
| Fire protection | Aerosol, water fire system, detectors, alarm, explosion-proof ventilation |
| Communication | Ethernet / 4G / RS485 / CAN |
Source: Dyness DH200F-C260 Datasheet EN 2026-07-03. Specifications may change without notice; always check the latest datasheet.
All documents: Dyness technical resources.
Confirm the supply phase, distribution board, cable routes and a ventilated mounting location.
Prepare a level, load-rated foundation with manufacturer clearances for cooling and maintenance access.
Connect the BMS communication cable (CAN/RS485) between battery and inverter, then select the battery protocol in the inverter settings.
Check firmware versions against the compatibility list, set charge limits, and test grid-loss changeover.
Download the official datasheet and manual from the Downloads tab. For installer support, ask a technical question on WhatsApp.
Battery World Uganda supplies the Dyness DH200F 125 kW / 261 kWh All-in-One Cabinet from Kampala. Tap "Order on WhatsApp" for availability and a quotation.
Per the manufacturer warranty policy — ask Battery World for current terms.
Self-contained PCS + battery system.
Yes. Battery World can arrange professional installation and commissioning. Select "Installation required" when you enquire.
Related products
Engineered per project
Works with Deye
Engineered per project
Run Find My System to check inverter power, battery hours and solar sizing against your actual appliances.